5.
6.
Attach a Clip to the horizontal wire on each side of the home. Use the clip to secure the Wire Top to
the Plastic
Bottom.
Using a BLUE Ring and the Clear Cap, cover
the hole on the top of the Vertical
Playspace.
7.
Install the Exercise Wheel. Remove the Pin from the Plastic Arm, and place the Arm in the
designated slot on the Vertical Playspace. Place the Wheel over the arm. Replace the Pin in the
Arm to secure the Wheel in place.
8.
Connect the two halves of the Circular Cubby. Make sure the hole is facing right and the pegs to
hang the Cubby are in the back. Hang the Cubby on the Playspace on the far left, two rows
down.
4.
Place the Wire Top and Playspace on the Plastic Bottom.
Assemble the Tube. Connect the various halves of the clear plastic tube and secure them
together with five BLUE rings as shown. Connect the assembled tube to the underside of the wire top. This will allow your pet access from the main area to the
Vertical Playspace.
3.
