www.midtronics.com
MDX-650P SOH
15
Maintenance & Troubleshooting
Cable Assembly Replacement
1. Remove the protective rubber boot and slide it down the cable away from
the tester.
2. Remove the circled screw and firmly pull the cable assembly base out of
the tester body.
3. Remove the two screws holding the cable assembly base cover.
4. Remove the cover.
5. Slide the protective rubber boot over the end of cable base assembly.
6. Repeat steps 1 through 5 in reverse to connect the new cable assembly to
the tester.
Summary of Contents for MDX-650P SOH
Page 2: ...Blank page...
Page 4: ...www midtronics com MDX 650P SOH 4...
