Midtronics MDX-650 MILITARY, Instruction Manual

Page: 11 / 20

•
11
•
6.
#"55&3:3"5*/(
Scroll to and select the rating units. Hold down the
UP
or
DOWN ARROW
button to increase the scrolling speed.
7. Press
ENTER
to start test. After several seconds the tester displays the deci-
sion on the ba ttery’s condition and the measured voltage. The tester also
displays your selected battery rating and the rating units.
Battery Test Results
Decision Interpretation
GOOD BATTERY Return the battery to service.
GOOD-RECHARGE Fully charge the battery and return it to service.
CHARGE & RETEST Fully charge the battery and retest. Failure
to fully charge the battery before retesting
may cause inaccurate results. If CHARGE &
RETEST appears again after you fully charge the
battery, replace the battery.
REPLACE BATTERY Replace the battery and retest. A REPLACE
BATTERY result may also mean a poor
connection between the battery cables and the
battery. After disconnecting the battery cables,
retest the battery using the out-of-vehicle test
before replacing it.
BAD CELL-REPLACE Replace the battery and retest.
24 VOLT SYSTEM 24-volt system detected. Disconnect batteries
and test individually.
READY TO INSTALL Battery has just been activated and is ready to
install in vehicle (Motorcycle only)
NEEDS CHARGE Fully charge battery and retest using BEFORE
DELIVERY. (Motorcycle only)
Failure to fully charge the battery before
retesting may cause false readings.
Decision
Measured
CCA
Measured
voltage
Selected
rating
www.midtronics.com
MDX-650P
Battery Conductance &
System Analyzer