ChargeXpress PRO 50-2
ChargeXpress PRO 50-2
Midtronics bv. Hoofdveste 6 - 8 Houten NL
www.midtronics.com
Midtronics bv. Hoofdveste 6 - 8 Houten NL
www.midtronics.com
8
9
Chapter 1: Before You Begin
Chapter 2: Specifications
Disposal
Do not dispose of this device with normal
domestic waste!
To comply with the European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment and its implementation
as national law, electrical equipment that has reached the
end of its life must be collected separately and returned
to an approved recycling facility Any device that you no
longer require must be returned to our agent, or find out
about the approved collection and recycling facilities in your
area. Ignoring this European Directive may have potentially
adverse affects on the environment and your health! Please
be aware that in other parts of the world local legislation
should be followed.
Conventions used in this manual
To help you learn how to use your charger the manual uses
these symbols and typographical conventions:
Convention
Description
!
The safety symbol indicates instructions for avoiding hazardous conditions and personal injury.
The safety symbol with the words
CAUTION
,
WARNING, or DANGER
indicates instructions for
avoiding hazardous conditions and personal injury.
CAUTION
The word
CAUTION
indicates instructions for avoiding equipment damage.
The wrench symbol indicates procedural notes and helpful information.
UP ARROW
The text for keypad buttons are in
Bold
capital letters.
CAPITAL LETTERS
The text for screen options are in regular capital letters.
BACK ARROW
The text for soft keys are in
Bold
capital letters.
Chapter 1: Before You Begin
General
Lead-acid batteries
GEL, AGM/SPIRAL, Flooded,
Power supply
Number of cells
6
Rated capacity
20 to 250Ah
Note
: A 24 V operation consists of two 12 V (6cell) batteries
connected in series.
Input Ratings
230 V AC (16A) 50 / 60Hz
(Tolerance: 190 - 265 V AC 50 / 60Hz)
Output Ratings
Charger
DC Voltage Amps
Watts
PRO 50
12 V
50 A single channel
2x 25 A dual channel
660
Chapter 2: Specifications
