ONE KEY RETURN
When you press one key return button, the drone will fly back to
the controller's position, and this function will stop when you use
the right joystick to control the direction of the drone.
Note that the drone will not proceed to auto landing when you
activate this function. When the drone is close to teh remote
control’s position, you need to take the control of it manually.
INSTRUCTIONS FOR USE IN WIFI MODE
You can either control the drone by Midrone SKY 180 application on the smartphone, or mount the
smartphone on the remote control and use the smartphone screen only for video transmission.
This second option will be explained later in this manual.
WIFI CONNECTION BETWEEN THE DRONE AND SMARTPHONE
Download and install the application
The app Midrone SKY 180 is needed to control the drone through the smartphone. It is available
free for download on Google Play for Android phones and on the App Store for iPhones.
WiFi connection
1. Connect the battery of the drone and place the ON/OFF switch located under the drone on
ON position, the LED lights will flash to indicate that the drone is waiting for a connection.
2. Go to the WiFi settings of the smartphone and start the search for new devices.
3. Select MIDR_SD180xxx from the list and wait until the connection is successfully established.
4. Place the drone on a flat surface and start Midrone SKY 180 application on the smartphone.
Important informations
It is recommended to set the smartphone in airplane mode during control of the drone to avoid
receiving a call during the flight or any other disturbance which could alter the signal and cause
loss of control of the drone.
Other WiFi networks nearby can disturb the video signal.
Do not use the drone near high-voltage cables or other magnetic fields to avoid the alteration
of the transmission signal and loss of control of the drone.
When the drone is turned off and on, verify that the wireless connection is restored correctly.
CONTROL THE DRONE WITH THE SMARTPHONE
It is possible to control the drone without the remote control directly through the smartphone
screen. Place the drone on a flat surface and make sure the WiFi connection is established.
Start MiDrone SKY 180 APP on the smartphone.
Home Screen:
1. Press this button to show the instructions
of the APP.
2. Press this button to enter the parameters
menu of the APP.
3. Press this button to show the control
interface of the drone
