5
2. The R72613 product is waterproof. After the network-joining is completed, please leave it outdoors.
(1) In the position to be installed, loosen the U-shaped screw of the bottom of the R72613 and the mating washer nut, and fix the U-shaped screw through
the appropriate size cylinder on the R72613 fixed strut piece. Install the washer nut in order, lock the nut till R72613 body is stable and does not
shake.
(2) At the upper side of the fixed position of R72613, loosen the two U-shaped screws on the side of the solar panel and the mating washer nut. Fix the
U-shaped screw through the appropriate size cylinder on the main bracket of the solar panel, and install the gasket in sequence. Lock nut till the solar
panel is stable and does not shake.
(3) Adjust the angle of the solar panel. After the adjustment is completed, lock the nut.
(4) Connect the R72613 top waterproof cable to the solar panel wiring and lock it tight.
(5) R726X has a battery compartment inside, users can buy and install rechargeable 18650 lithium battery, a total of 3 sections, a single rechargeable
lithium battery voltage 3.7V, capacity recommended 5000mah, the installation of rechargeable lithium battery steps are as follows: 1: Remove the
four battery box screws and install three rechargeable lithium batteries.
2: Press the activation button on the battery box for the first time.
3: After activation, close the cover and lock the 4 box screws.
Rechargeable lithium battery installation instructions.
3. The RA0713Y product is waterproof and can be placed outdoors after the network-joining is completed.
(1) In the position to be installed, loosen the bottom U-shaped screw of the RA0713Y and the mating washer nut, and fix the U-shaped screw through
the appropriate size cylinder on the RA0713Y fixed strut piece. Install the washer nut in order, lock the nut till RA0713Y body is stable and does not
shake.
(2) Loosen the M5 nut at the bottom of the 727 matte and take the matte together with the screw.
(3) Insert the power DC plug from the center through hole of the RA0713Y bottom cover, insert it into the RA0713Y DC socket, and then return the
mating screw to the original position and lock the N5 nut tight.