2
Note:
1.
Engineering test modes require the burning engineering test software.
2.
On/off interval is suggested to be about 10 seconds to avoid the interference of capacitor inductance
and other energy storage components.
Network Joining
Never joined the network
(Or at factory setting )
Turn on the device to search the network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Had joined the network
(Not at factory setting.)
Turn on the device to search the previous network.
The green indicator stays on for 5 seconds: success
The green indicator remains off: fail
Fail to join the network
(when the device is on)
First two mins: wake up every 15 seconds to send request.
After two mins: enter sleeping mode and wake up every 15 minutes to send
request. Note: Suggest to remove batteries if the device is not used to save power.
Suggest to check the device verification information on the gateway or consult your
platform server provider.
Function Key
Press and hold for 5 seconds
Restore to factory setting / Turn off
The green indicator flashes for 20 times: success
The green indicator remains off: fail
Press once
The device is in the network: the green indicator flashes once and the device sends a data report
The device is not in the network: green indicator remains off
Low Voltage Threshold
Low Voltage Threshold
10.5 V
Restore to Factory Setting
Instruction
RA0713_R72613_RA0713Y has a network information memory function saving function when power-down.
This function is turned off by default, that is, it will be re-joined every time it is powered back on. This function
can be turned on by the ResumeNetOnOff command. At this time, each time the power is rewritten, the last
network joining information will be recorded (including saving the network address information assigned to it,
etc., if you want to join a new network, you need to perform a factory resetting operation first.)
It will not
be re-joined the previous network.
Operation
1.
Press and hold the button for 5 seconds and release (the binding button is released when the LED
flashes), and the LED flashes for 20 times.
2.
The device will automatically restart to re-joining.