MND3RACCPLME (continued)
12 |
P a g e 1 0 - 2 2 0 - 1 R E V : B
At this point we need to turn the Large 250 amp breaker on (The one on the far right) to power up the
Magnum inverter. After power up we strongly suggest going through the settings in the Remote for the
Magnum to verify everything is set correctly. Below is a picture of the Router. We suggest you consult the
Magnum Routers owner’s manual for the most up to date info on the Router. To navigate through the 1
through 3 menus follow the steps below.
On initial Power up the Router will ask you to set the time.
To Set the Current Time
1-Turn the Select knob to the hour of day, and then press the Select knob. Make the adjustments by
turning the Select knob and when done press the Select knob.
2-Turn the Select knob to the correct minute setting, and then press the Select knob. Make the adjustments
by turning the Select knob and when done press the Select knob.
3-Turn the Select knob to the appropriate AM or PM setting, Make the adjustments by turning the Select
knob and when done press the Select knob.
Router.
