manualshive.com logo in svg

Midland MICRO MOBILE MXT500, Manual

Share
Download
Midland MICRO MOBILE MXT500 Manual Download Page 27

Page 27

midlandusa.com

Model MXT500

1. Press the MENU button to enter the menu. Use the CHANNEL/MENU  
    SELECTION knob to navigate to menu setting #13 - USB. 

2. To enable or disable USB-C programming, press the CHANNEL/MENU  
    SELECTION knob. Use the CHANNEL/MENU SELECTION knob to  
    choose between ON or OFF. Press the CHANNEL/MENU SELECTION  

NQREWRFRQ¿UP\RXUVHOHFWLRQ

3. Press the menu button to exit the USB-C programming settings.

Restoring the Default Settings

You can restore the factory (default) settings for your MXT500 at any time.

1. Press the MENU button to enter the menu. Use the CHANNEL/MENU  
    SELECTION knob to navigate to menu setting #14 - RESTORE. 

2. To reset your radio, press the CHANNEL/MENU SELECTION knob.  
    Use the CHANNEL/MENU SELECTION knob to select FACT. Press the  

&+$11(/0(186(/(&7,21NQREWRFRQ¿UP\RXUVHOHFWLRQ

3. Once reset, the radio will restart with the factory settings

CARE AND MAINTENANCE

CAUTION: DO NOT use alcohol or cleaning solutions to clean the radio. 
DO NOT immerse the radio in water.

1. Use a soft cloth moistened with water to clean the radio. 

2. Dry the radio with a dry lint-free cloth should it get wet.

Summary of Contents for MICRO MOBILE MXT500




































Reviews:

No comments

Brands by name

Popular brands

Load more brands