Page 26
midlandusa.com
Model MXT500
2QFH\RXFRQ¿UP\RXUEULJKWQHVVOHYHOWKH/&'ZLOOGLVSOD\WKH
brightness chosen.
3. Press the menu button to exit the display brightness settings.
Repeater Channels
The MXT500 can talk to GMRS repeaters, which can greatly increase
radio range. You can enable and disable the repeater channels on the
MXT500. There are 8 repeater channels.
NOTE:
Be sure to be aware of the local sharing and usage policies set
forth by the owner and operator of the repeater.
1. Press the MENU button to enter the menu. Use the CHANNEL/MENU
SELECTION knob to navigate to menu setting #12 – REP.
2. To enable or disable repeater channels, press the CHANNEL/MENU
SELECTION knob. Use the CHANNEL/MENU SELECTION knob to
hoose between ON or OFF. Press the CHANNEL/MENU SELECTION
NQREWRFRQ¿UP\RXUVHOHFWLRQ
• Once repeater channels are enabled, they will be available in the
channel list (see SELECTING AN ACTIVE CHANNEL). They will be
displayed as RP 15 – RP 22.
• When using a repeater channel, a + will appear on the LCD to indicate
the repeater offset direction.
3. Press the menu button to exit the repeater channel settings.
USB-C Programming Function
The MXT500 had a built in USB-C charging port that allows you to quickly
charge other devices. It may also be used as a programming port for
updates. However, when the USB port programming function is ON it may
interfere with some charging protocols.
IMPORTANT!
When using the MXT500 the USB-C port for charging
the USB programming function should be set to OFF. Only when the
radio needs to be programmed through the USB-C port, should the USB
programming function be set to ON.
IMPORTANT!
When the USB-C programming function is set to OFF, the
USB-C port is still a functional charging port for your devices.
Summary of Contents for MICRO MOBILE MXT500
Page 1: ......
