background image

6 |

 

 

Midland G10 instruction guide

Operations

Power on/off and volume adjustment

Rotate the 

Power/Volume knob 

clockwise to turn the radio on. 

Rotate the control clockwise /counter-clockwise to adjust the volume le-
vel as you prefer.
To turn the radio off, rotate the control counter-clockwise till hearing a 
mechanical “click”.

Transmission

To communicate, all radios in your group must be set to the same chan-
nel.
Briefly press the 

Function key 1

 to enable the Monitor feature in order 

to make sure that the frequency is not busy, then press the 

PTT 

button.

For a maximum clarity, hold the device at a distance of about 4/10 cm.
Release the 

PTT 

key to receive.

Only one user at a time can talk during radio communications. Therefore, it is 
important not to transmit when you are receiving a communication and use 
the transmission mode sparingly to allow other users to talk.
Transmission consumes a significant amount of energy and should therefore 
be used sparingly to prolong the battery life. 
If you are unable to contact a station that you have no problems in receiving, 
the station may be using CTCSS tones or DCS codes.

Monitor

The Monitor feature is for excluding (opening) the Squelch, in order to 
listen to signals that are too weak to keep the Squelch permanently ope-
ned.
Hold down the 

Function key 1

 to enable such function.

Scan

This function can be activated only by means of the optional program-

Summary of Contents for C1107















Reviews: