background image

UK

7

hear one audio confirmation tone).

To make a voice call:

Briefly press “Control” button. If your mobile 

 ›

phone supports voice calls, you will be asked 

to  speak  the  name  of  the  contact  you  wish 

to call.

Priority: Calls have a high priority, which means 

that  all  other  communications  are  temporarily 

disabled when a call arrives and automatically 

re-enabled once the call ends.

Attention: the voice call command is possi-

ble  only  if  the  BTSKI  has  never  been  con-

nected to another BTSKI for Intercom com-

munication.

Ending a call

There are several ways to end a call:

Wait for the called person to end the call.

 ›

Press the “Control” button for 3 seconds (you 

 ›

will hear an audio confirmation tone).

Press “End” button on the mobile phone. 

 ›

Using the MP3 player feature of the 

mobile phone

Many  mobile  phones  are  now  designed  to  be 

used as stereo MP3 players. The 

BTSKI

 device 

fully supports the A2DP and AVRCP protocols 

that  enable  you  to  listen  to  stereo  music  and 

remotely  control  your  mobile  phone’s  MP3 

player.  You  can  even  use  the  buttons  on  the 

BTSKI

 unit to control the following play options: 

Play, Pause, Forward and Backward.

Available controls:

To play/pause music

 ›

, double click the “Con-

trol” button.

To  skip  forward  to  the  next  song

 ›

,  keep 

pressed the “” button.

To skip backwards to the previous song

 ›

keep pressed the “volume-“ button.

To  enable  your  connected  MP3  Player 

 ›

(ADP/AVRCP)

, press and hold down the “Vo-

lume +” and “Volume-“ buttons for 3 seconds 

(this feature is active by default).

To disable the MP3 player

 ›

, press and hold 

down the ”” and “volume-“ buttons (2 

beeps will confirm it).

Priority:  the  music  listening  mode  has  the  lo-

west priority. Therefore, it will always be disa-

bled  when  another  type  of  communication  is 

enabled.

Using the intercom feature     

To  use  the  Intercom  feature,  be  sure  both 

BTSKI

  units  are  turned  on  and  previously 

paired together.

Pairing with another BTSKI device

Place  both 

BTSKI

  units  in  Setup  mode  (red 

Volume -

Control

Summary of Contents for BTSKI

















Reviews: