PEDAL DEFINITION
Press FUNCTION button, the display will show “F-“ to prompt you to input a function code.
Then press PEDAL button, current pedal definition code will appear on the display. Now, you
can define the pedal in the unit using number button 1 - 4. You can also use + or - button to
change it.
1: Sustain Pedal - Pedal down for sustain on, pedal up for sustain off.
2: Soft Pedal - down for soft on, up for soft off.
3: Channel Setting Pedal - Once press down the pedal, the channel number will be increase by
one.
4: Reserved (no function)
About 3 seconds after you complete the operation, the display will return to indicate program
number.
MSB
Press FUNCTION button, the display will show “F-“ to prompt you to input a function code.
Then press MSB button, current MSB control code will appear on the display. Now, you can
change MSB using numerical button
or + / - button to change it ranging from 1 to 128.
Transmitted MSB is the figure on the display minus 1. For example, “099” on the display is
transmitted as 98, etc.
About 3 seconds later after you complete the operation, the display will return to indicate
program number.
LSB
Press FUNCTION button, the display will show “F-“ to prompt you to input a function code.
Then press LSB button, current LSB value will appear on the display. Now, you can change
LSB using numerical button or + / - button to change it ranging from 1 to 128.
Transmitted LSB is the figure on the display minus 1. For example, “099” on the display is
transmitted as 98, etc.
About 3 seconds later after you complete the operation, the display will return to indicate
program number. Bank select is executed if Program change is done!!
12
