Miditech Groovestation, Owner'S Manual

Page: 9 / 15

Curve to change the responds to your key when pressed. Since MIDI supports
127 different velocity values (from 1 to 127), this function will allow you to
choose the velocity curve you want. There are 8 velocity curves for different
people. You can choose the velocity curve from the following setting steps:
 Press the "MODE" Button and the LED under the button will light on.
 Press the "Curve" Key.
 LCD will display the current velocity curve number.
 You can choose the velocity curve you want by using "OCTAVE
UP&DOWN" Buttons or "DATA ENTRY" knob.
 The selected velocity curve will activate.
 Press the "MODE" Button again (LED lights off) to save the edit.
>>
Velocity Curve graph in page 23
<<
2.2.2 Initialization
The initialization will restore Groovestation's factory settings, which will erase
all the presets and the saved values.
To do the Initialization, you need to do as follows:
 Press the "MODE" Button and the LED under the button will light on.
 Press the "Initialize" key.
 LCD will show "Enter to perform".
 Press the "NEXT" key. (The key on the keyboard marked "NEXT") .

LCD will show "Enter to confirm".
 Press the "NEXT" key to confirm.
 When Initialization is done, the LCD will go back to EDIT scene.
 Press the "MODE" Button again (LED lights off) to save the edit.
2.2.3 Global Channel
Use this function to select different MIDI commands using certain keys from
your keyboard. Activating this function the keyboard becomes a set of function
Buttons for setting MIDI parameter commands.
The Groovestation's global MIDI channel is assigned by the following steps:
 Press the "MODE" Button and the LED under the button will light on.
 Press the "Channel" key.
 Use "OCTAVE UP & DOWN" Buttons or "DATA ENTRY" to select the
9