Miditech Groovestation, Owner'S Manual

Page: 8 / 15

be stored into 16 different groups at any time. Also, you can use the "SELECT"
Button to choose any setting of different controllers in just a few steps.
In order to activate this function, you need to do as follows:
 Press the "SELECT" Button and the LED under the button will light on..
 Move the "DATA ENTRY" Knob to select a desired number. (1-16)
 Press the "SELECT" Button again (LED lights off) to complete the process.
The selected group will activate soon.
2.1.3 Set Mode Button
Pressing the Mode Button, then you can configure the device with the labeled
key and edit all the controllers (include knobs, sliders, pads, Transpose
buttons).In order to change the configuration of the device or edit the
controllers, you need to do as follows:

Press the "MODE" Button and the LED under the button will light on.
 Press the labeled key or select the controller you want to edit
 Adjust the "DATA ENTRY" Knob or press the "Octave UP & Down"
Buttons to select the desired number. You can see the number on the LCD
screen.
 Press the "MODE" Button again (LED lights off) to save the edit. And the
selected value will activate soon.
Note: If you press the "SELECT" Button, the edit also can be saved
successfully.
2.2 Setting
To make music on your keyboard is a very simple way. You just need to get
familiar with the related features with the instrument. The following sections
will discuss each of these features in detail.
2.2.1 Velocity Curve
When you're using a keyboard to play back a sample, you may find that it
doesn't respond what you want. Pressing a key lightly may sound too quiet, and
pressing a key hardly may sound too loud. Then you can use the Velocity
8