Miditech Groovestation, Owner'S Manual

Page: 11 / 15

It is possible to transpose up or down by as much as 12 MIDI notes (or
semitones). This means if you press one of the transpose Buttons 12 times, the
tone will sound exactly one octave higher or lower.
To do the Transpose, you need to do as follows:
 Press the "MODE" Button and the LED under the button will light on.
 Press the "Transpose" Button.
 Use "DATA ENTRY" Knob or move “Octave UP & Down" Buttons to select
a desired number.
 Press the "MODE" Button again (LED lights off) to save the edit.
2.2.6 Controller Select
The Control Select function (CTRL SEL) will allow you to begin.
Programming the controller channel, the knobs, sliders, trigger pads and
transport, Sustain pedal, Data Entry and Modulation wheel. In order to change
the value of each controller, you need to do as follows:
 Press the "MODE" Button and the LED under the button will light on.
 Select the controller you want to edit by pressing or turning.
 Tum the "Data Entry" Knob or press the "Octave UP & Down" button to
choose the control number you want to edit. You can see the Control Number
on the LCD screen.
 Press the "Next" Key to set the channel.
 Turn the "Data Entry" Knob or Press the "Octave UP & Down" button to
choose the channel. You can see the channel number on the LCD screen.
 Press the "MODE" Button again (LED lights off) to save the edit.
To program the controller of Data Entry, it is a little difference to others; you
need to do as follows:
 Press the "MODE" Button and the LED under the button will light on.
 Press the "DATA KNOB" key.
 Tum the "Data Entry" Knob or press the "Octave UP & Down" button to
choose the control number you want to edit. You can see the Control Number
on the LCD screen.
 Press the "Next" Key to set the channel.
 Turn the "Data Entry" Knob or Press the "Octave UP & Down" button to
11