6
X III Series User Manual
Sliding up on the Modulation touch strip increases the amount of modulation on the selected tone. The
response depends on the settings of the instrument being controlled. Certain instruments or presets will
not use the modulation parameter.
2.5 Knobs
X III has 4 assignable knobs with backlit, the default control functions of each knob are as follows:
Knob
Purpose
MIDI CC Number
K1
Chorus Send Level
CC93
K2
Reverb Send Level
CC91
K3
Timbre/Harmonic
CC71
K4
Brightness
CC74
You can assign any MIDI CC (continuous controller) number to each knob in Setting Mode. Please refer
to
3.7.1 Changing The Knobs CC Number
for detailed operation steps.
2.6 Transport Buttons
X III has 6 buttons with three mode: MCU(default), HUI and CC mode, you can change this in Setting
Mode. Please refer to
3.2 Changing The Transport Buttons Mode
In MCU and HUI mode, these buttons controls the transport of DAWs, and control the in CC modeplease
refer to
Button Purpose
MIDI CC Number
B1
Undefined
CC25
B2
Undefined
CC26
B3
Undefined
CC27
B4
Undefined
CC28
B5
Undefined
CC29
B6
Undefined
CC30
Any MIDI CC number can be assigned to each button in Setting Mode, please refer to
Changing The Buttons’CC Number
•
►
■
B1
B2
B3
B4
BS
B6
Summary of Contents for X III Series
Page 1: ...SERIES USER MANUAL MIDIPLUS...
Page 28: ...V1 0 www midiplus com...