8
2B
OPERATION
Voice Alarm Encode:
When the Emergency input is activated, the unit will assert the PTT Output and send the
Emergency ANI and recorded voice message out the TX Tone Output.
The speaker mic has three buttons; PTT, Button 1 and Button 2. The PTT button is the larger oblong button,
Button 1 is the top round button with one nub and Button 2 (not used) is the bottom round button with two nubs.
PTT Button:
Once record mode has been activated the PTT button is used to indicate the starting and ending of the recording.
Button 1:
Button 1 is a momentary button that can be programmed for Record Start, Record Stop/Play or Record
Start/Stop. The functions can be selected by a short press, long press (press and hold for 1 second) or double
press.
Record Start:
Message Recording on Power Up:
If the Auto Record feature is enabled the unit will record a voice
message immediately upon power up. Press the PTT button to record the voice message.
Message Recording with Mode Button:
Pressing Button 1 in the programmed manner (i.e. short press, long
press) will cause the unit to start recording. Press the PTT button to record the voice message.
Record Stop/Play:
Pressing Button 1 in the programmed manner (i.e. short press, long press) will cause the
voice message recording to stop and the unit will play back the message over the speaker for confirmation if the
Auto Review box is checked.
Midian recommends using the power from the radio, or from our AC adaptor. Use of any other power source may
void the warranty.
MIDIAN CONTACT INFORMATION
MIDIAN ELECTRONICS, INC.
2030 N. Forbes Blvd. #101
Tucson, Arizona 85745 USA
Toll-Free:
1-800-MIDIANS
Main:
520-884-7981
E-mail:
Web:
www.midians.com
