midex uFace800, User Manual

Page: 32 / 103

COMMUNICATION
32
3
SYSTEM
32
4
You can change the value from the image above.
The default will be set to 35 Select
FP sensor Sensitivity
. It is used to set the sensitivity of fingerprint
collection.
The default value Medium is recommended. You can set the sensitivity of
fingerprint collection to High when the response to finger scan lags in a dry
environment. When the usage environment is humid, you can set the sensi-
tivity of fingerprint collection to Low if the fingerprint is difficult to identify.
You can change the retry times from the image above. The value ranges
from 1 to 6.
This parameter is used to set the retry times in the event of failure of 1:1 veri-
fication or password verification due to an absence of fingerprint enrollment
or improper finger placement, so as to avoid repetitive operations.
Here you can select the
Fingerprint Image
to be show. If you select this
option the display of the fingerprint image on the screen will be shown.