![background image](http://html.mh-extra.com/html/midea/wqp12-5203/wqp12-5203_instruction-manual_1791016010.webp)
10
1.
Remove the lower basket and unscrew the reservoir cap.
2.
Place the end of the funnel (supplied) into the hole and pour in about 1.5kg of
dishwasher salt.
3.
Fill the salt container to its maximum limit with water, It is normal for a small
amount of water to come out of the salt container.
4.
After filling the container, screw back the cap tightly.
5.
The salt warning light will stop being after the salt container has been filled with salt.
6.
Immediately after filling the salt into the salt container, a washing program should
be started (We suggest to use a short program). Otherwise the filter system, pump
or other important parts of the machine may be damaged by salty water. This is
out of warranty.
NOTE
:
The salt container must only be refilled when the salt warning light ( )
in the
control panel comes on. Depending on how well the salt dissolves, the salt
warning light may still be on even though the salt container is filled.
If there is no salt warning light in the control panel (for some Models), you can
estimate when to fill the salt into the softener by the cycles that the dishwasher
has run.
If salt has spilled, run a soak or quick program to remove it.
Please follow the steps below for adding dishwasher salt:
Summary of Contents for WQP12-5203
Page 32: ...PARTⅡ Special Version ...