![background image](http://html.mh-extra.com/html/midea/wqp12-5203/wqp12-5203_instruction-manual_1791016021.webp)
21
Underneath existing work top
(
When fitting beneath a work top)
In most modern fitted kitchens there is only one
single work top under which cabinets and
electrical appliances are fitted. In this case remove
the work top of the dishwasher by unscrewing the
screws under the rear edge of the top (
a
).
a
a
b
b
Built-In Installation
(for the integrated model)
Step 1. Selecting the best location for the dishwasher
The installation position of dishwasher should be near the existing inlet and drain hoses
and power cord.
Illustrations of cabinet dimensions and installation position of the dishwasher.
1.
Less than 5 mm between the top of dishwasher and cabinet and the outer door
aligned to cabinet.
90 °
90 °
580mm
580mm
820mm
820mm
100
100
Electrical, drain
and water supply
line entrances
Electrical, drain
and water supply
line entrances
Space between cabinet
bottom and floor
Space between cabinet
bottom and floor
600 mm(
for
60cm
model
)
450
mm
(
for
45cm
model
)
80
80
After removing the work top, the screws must be screwed again under the rear edge
of the top (
b
).
Attention
The height will then be reduced to 815 mm, as scheduled by the International
Regulations (ISO) and the dishwasher will fit perfectly under the kitchen working top
Summary of Contents for WQP12-5203
Page 32: ...PARTⅡ Special Version ...