10
11
Product Operation
NOTE
NOTE
Charging your Robot Vacuum
Installing the Side Brushes
a. Turn the unit over.
b. With unit upside down, align side brush over brush post
c. Press down side brush until it snaps in place.
d. Ensure side brushes can rotate freely.
.
Open the cover and slide power switch
to on.
2
Place vacuum on the docking station, ensuring the charging contacts are touching. A white
light will start flashing, indicating the robot is charging.
Charge for 12 hours before first use.
3
1
Put the docking station well
：
Place the
docking station against a wall and remove
all of obstructions around the docking
stand, as shown in the figure below.
1. Do not use your robot on wet surfaces or surfaces with standing water. Before using the
product on a rug with tasseled edges,please fold the rug edges under.
2 .Prepare room for cleaning, it is suggested to tidy up the room such as picking up small
objects from the floor and clearing away loose cords.
EN
a.
When vacuum is charging, a white light will flash on the top of the
vacuum;
b.
When charging is complete, the white light will remain
constant;
c.
When the battery is low, a red flashing light will show;
d.
If the robot is cleaning when low battery is identified, the robot
will automatically find the docking station to charge.
e.
The robot can also be manually sent back to the docking station
to charge by using the remote, or app.
f.
Before charging, it is suggested to empty the water tank and
remove the mopping pad and holder.
