1 . Auto Scale Removal Function
repeatedly, when " CLE " indicator lighten t means to enter Scale
t time " 20:00 " lights up, tank icon shows the current
R
emoval function. “Min” and defaul
, i
water level ( water, lack of water, full of water ), other icons disappear.
For best cleaning results, we recommend that you use detergent sodium citrate, which were
randomly for descaling steam microwave oven. Follow the manufacturer's instructions on the
packaging. It is suggested that descaling function should be used after the steam function has
been run for 20 hours.
Note
prog
: the desca
gram must b
aling process
be started fro
s shall not b
om s
.
be shut downn. If the desccaling proceess shut dowwn before the
entire
end, the
1) Power up the system and remove the water tank. Then inject 1000ml of fresh water into the
water tank and add a pack of descaling agent.
3) In standby mode, press " "button. The display " " lights and screen displays
2) Push the tank into the furnace where appropriate.
4) Press "
"
5) Press " " to start the program.
6) Wait for 1 minute after the program has finished.Take out the water tank and pour
the water in the tank. Thoroughly clean the water tank.
) Replace the fresh water and then repeat steps 3 to 6.
tep 3
7
7
Defect codes
Below defect codes may occur during steam functions :
E-06: 1-Water tank is not close well.
E-05: water system abnormal, need to contact for Engineer to check, below is the
possibilities.
1-The water sensor is abnormal.
3-The water pump is abnormal.
2-The water pipe is abnormal.
4-The water tank is abnormal.
default mode d01, default weight 0.10, corresponding cooking time and " Kg ""Min" light up.
26
Summary of Contents for TR936T4CR
Page 36: ......