13
14
Note
2
Random cleaning
Edge cleaning
Cleaning Mode Operation
Auto cleaning
Spot cleaning
Zigzag cleaning
In auto cleaning mode, the machine auto
cleans the room and adjusts the cleaning
mode according to the environments. You
can press the “ ” button on the main unit
or the remote control to enter the auto
cleaning mode.
Press and hold the On/Off button on the remote control or the “ ” button on the
machine for 3 seconds to put the machine into sleep mode. Press and hold the “ ”
button to wake up the machine. The remote control can be activated by pressing the
On/Off button on the remote control in the first 15 minutes when the machine enters
sleep state.
1. Use dry mopping method with the rag; (MR02 only)
2. Make sure that the dust bin has been installed before cleaning.
3. If there is no operation within 1 minute, the machine will automatically enter the sleep state. After 15
minutes, the machine automatically turns off to prevent the battery from being over-discharged and
damaging the battery life. If you do not use the machine for a long time, turn off the power switch.
Press on the remote control to switch
to spot cleaning mode.
Press on the remote control to switch to random cleaning mode.
Press on the remote control to switch to Edge cleaning mode, and the machine
will clean the edges of the obstacle with its brush.
Zigzag cleaning is mainly used for quick and efficient cleaning in large areas without
furniture.