11
12
Note
Note
1
2
3
4
1 M
1 M
2 M
A
B
Battery Charging
Product Operation
Instructions for Use
A. Make sure that the power switch is on before charging, or else the red indicator will flash rapidly,
accompanied by the buzzer sound;
B. When the machine is charging, the “ ” clean button changes to slowly changing red color;
C. After charging, the buzzer will beep 5 times (each charging time does not exceed 5 hours);
D. When the machine is used for the first time, please run out the electricity of the machine;
E. After the power is used up, please recharge the machine as soon as possible;
F. If you do not use the machine for a long time, turn off the power switch.
1
When cleaning without using a dry cloth, place the machine on the ground, turn on the
power switch at the bottom of the machine, press the “ ” button or press the On/Off button
on the remote control to start the machine; press the “ ” button or the On/Off button again
to pause the machine; when cleaning with a dry cloth, first turn on the power switch at the
bottom of the machine, put the rag bracket (including rag) on the base of the machine, put
the machine on the ground, turn on the power switch at the bottom of the machine, press the
“ ” button or press the On/Off button on the remote control to start the machine; press the
“ ” button or the On/Off button again to pause the machine. (Dry cloth cleaning is only
available for MR02)
Auto charging: When the cleaning is completed or the battery is too low, the machine will
automatically find the charging dock to charge.
1. Please keep the charger base powered. Otherwise, the machine can’t find the charging dock for
charging. This product complies with the European ERP energy consumption standard.
2. High-speed flow sound of the airflow is normal when the machine is running.
Turn on the power switch at the bottom of the machine. If the machine is on the ground
and working normally, the indicator will flash slowly in blue;
Turn on the power switch at the bottom of the machine, press the “ ” button, the
indicator flashes slowly in blue, and the machine enters standby mode.
You can charge the machine in either method below:
A. Plug the power adapter directly into the machine and turn on the power at the other
end.
B. Plug the power adapter to the charging dock and turn on the power, point the remote
control at the machine and press the “ ”, and the machine will recharge automati-
cally.
