![background image](http://html1.mh-extra.com/html/midea/rsj-35-300rdn3-b/rsj-35-300rdn3-b_technical-manual_1791197037.webp)
2
nd
Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual
2.2.4.6 TIMER
User can set up a running start time and a stop time on a specifically by the timer function. The least
numbers of timer is ten minutes.Time on: User can set up a start time by this. The unit will auto run one time
between the set time and 24:00 on the same day.
Method for set.
and TIMER ON set is finished
Stop operation for about 10s, flashing stops
Press the “UP” and “DOWN” key, you can
adjust the hour.
Press the TIMER ON key again, the minute
Press the “UP” and “DOWN” key, you can
adjust the minute.
, the minute digit
of the clock on the display starts flashing
slowly.
Press the TIMER ON key
CANCEL:
In the unlocked status, press CANCEL
key 1s and the TIMER ON function will
be canceled.
2.2.4.7
TIMER ON and TIMER OFF:
Users can set up a running start time and a stop time. When the start
time is earlier than the stop time, the unit will run between the set time. When the start time is later than
the stop time, the unit will run between the start time today and the stop time next day.
38
Summary of Contents for RSJ-35/300RDN3-B
Page 14: ...2nd Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual E HEATER MODE 15...
Page 16: ...2nd Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual 4 Dimensions 17...
Page 19: ...2nd Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual 7 Piping Diagrams 20...
Page 21: ...2nd Generation ALL IN ONE Type Heat Pump Water Heater Technical Manual 9 Exploded View 22...