![background image](http://html1.mh-extra.com/html/midea/r05-bge/r05-bge_user-manual_1791572002.webp)
Control System
(1) Mode Button
Once pressing, running mode will be selected in the following sequence:
Notes
: No heating mode for cool only type unit.
(2) FanSpeed
Fan speed will be selected in following sequence once pressing this button:
(3) Adjust button
▼
Decrease the set temp. Keeping pressing will decrease the temp with 1
℃
per 0.5s.
(4) Adjust button
▲
Increase the set temp. Keeping pressing will increase the temp with 1
℃
per 0.5s.
(5) ON/OFF button
For turning on or turning off the air conditioner.
(6) Air Direction
Activate swing function of air deflector. Once pressing, air deflector will turn 6
℃
. For normal operation and
better cooling and heating effect, deflector will not turn to the degree which is the state of deflector when the
unit is turned off (Only available when remote controller is used with corresponding unit.)
(7) Horiz Swing
Activate or turn off horizontal swing function. (Only available when remote controller is used with
corresponding unit.)
(8) Vert Swing
Activate or turn off vertical swing function. (Only available when remote controller is used with corresponding
unit.)
(9) Clock
Display the current time. (12:00 is displayed when resetting or electrifying for the first time.) Press CLOCK for
5s, icon indicating hour will flash with 0.5s. Press it again, and are used to adjust the figure. Setting or
modification is effective onlyby pressing OK button to make confirmation.
(10)Time ON
For time ON setting. Once pressing this button, the time will increase by 0.5 hour. When the set time
exceeds10 hours, pressing the button will increase the time by 1 hour. Adjusting the figure to 0.00 will cancel
time ON setting.
(11)Time OFF
For time OFF setting. Once pressing this button, the time will increase by 0.5 hour. When the set time
exceeds10 hours, pressing the button will increase the time by 1 hour. Adjust the figure to 0.00 will cancel time
ON setting.
(12)Reset Button
(inner located)
Press this button with a needle of 1mm to cancel the current setting and reset remote controller.
(13)Lock Button
(inner located)
Press this button with a needle of 1mm to lock or unlock the current setting.
AUTO
COOL
DRY
HEAT
FAN
→
→
→
→
AUTO → LOW → MED → HIGH