Midea P3-L, Operation & Instruction Manual

Page: 6 / 12

8 9
按压按钮，打开尘杯下盖倾倒灰尘；
Press the button, open the dust cup and dump the dust.
01
向左旋转，卸下尘杯，清洁尘杯和底盖上负附着灰尘;
Turn left to remove the dust cup, and clean the dust attached to the dust cup and the bottom cover.
02
向左旋转，卸下滤芯，清洁滤芯;
Turn left, and remove and clean the filter.
03
维护保养
Maintenance
主机灰尘清理：为保持吸尘器吸力，请定期清理灰尘。
Dust cleaning: To maintain the suction power of the vacuum cleaner, please clean the dust regularly.
向右旋转，卸下上盖，垂直向上取下HEPA，HEPA可用水清洗;
Turn right, remove the top cover, take out HEPA vertically, and wash with water.
04
各部件充分晾干后，根据拆解步骤装回即可。
When the parts are fully dry, install according to the steps.
提示：建议每次倾倒完灰尘后，进行以上清洁工作。
Tip: It is advisable to carry out the above cleaning after dumping dust.
05
注意
1. 请注意玻璃等锐利的物品，防止受伤；
2. 各部品需完全干透后方可装机使用；
3. 请勿对过滤棉进行搓洗或对其施加蛮力； 4. 组装时请务必检查过滤棉已经安装到位；
5. 当尘杯过滤棉破损或者清洁保养不充分时，请勿继续使用。
Caution
1. Please pay attention to sharp objects such as glass to prevent injury.
2. The parts must be completely dry before installing.
3. Do not scrub the filter cotton or apply brute force to it.
4. Please make sure that the filter cotton has been installed before assembly.
5. Do not continue to use when the filter cotton in the dust cup is damaged or if the cleaning and maintenance
are not sufficient.
按下
Push
Dust full
尘满位置
向左旋转
Turn left
向右旋转
Turn right
卸下尘杯
Take out