background image

6

SAFTEY FEATURES

Thermal cut-off: This heater includes a thermal cut-off that shuts the heater off if it

overheats due to abnormal conditions. If this occurs, turn the heater off, unplug it,

and inspect and remove any objects on or adjacent to the heater. Allow it to cool for

a few minutes, and then plug it back in and resume normal operation. 

Tip-over switch: This heater includes a safety tip-over protection feature that will

shut the heater off in case it is tipped over. If, at any time, the heater tips over,

please put the heater back in the upright position. The heater will resume its normal

operation.   

MAIN TECHNOLOGY SPECIFICATIONS

Power supply: AC220-240V ~ 50Hz 

MODEL

FAN

LO

MID

HI

POWER REGULATION RANGE (W)

NY23ECF-13L

500

1000

1300

2300

1. The electric heater should be cleaned regularly to wipe out the dust on the

    surface of flanges. As this may influence the radiating efficiency.

2. Disconnect electricity supply and allow radiator to cool, wipe out dust with a 

    soft damp cloth. Do not use detergent or abrasives.

3. Do not scrap the surfaces of flanges with sharp hard tools, to avoid surfaces

    getting rusty, because of damage of the paint coat.

CLEANING AND MAINTENANCE INSTRUCTION

Summary of Contents for NY23ECF-13L








Reviews: