background image

18. This appliance is not intended for used by persons 
    (including children) with reduced physical, sensory or 
    mental capabilities, or lack of experience and knowledge, 
    unless they have been given supervision or instruction 
    concerning use of the appliances by a person responsible 
    for their safety. Children should be supervised to ensure 
    that they do not play with the appliance. 

2

10. Keep this heater clean. DO NOT allow foreign objects 

    to enter any ventilation or exhaust opening as this may 

    cause electric shock, or fire, or damage the heater.

11. To prevent a possible fire, do not block air intakes or 

    exhaust in any manner. Do not use on soft surfaces, like 

    a bed, where openings may become blocked.

12. A heater has hot and arcing or sparking parts inside. Do 

    not use it in areas where gasoline, paint, or flammable 

    liquids are used or stored.

13. Use this heater only as described in this manual. Any 

    other use not recommended by the manufacturer may 

    cause fire, electric shock, or injury to persons.

14.      Warning: In order to avoid overheating, do not cover

    the heater.

15. Do not use this heater in the immediate surroundings of

    a bath, a shower or a swimming pool.

16. The heater must not be located immediately below a 

    socket-outlet. 

17. If the supply cord is damaged, it must be replaced by 

    the manufacturer or its service agent or a similarly 

    qualified person in order to avoid a hazard. Use of an 

    extension cord is not recommended. However, if it is 

    absolutely necessary ensure the cord is short as 

    possible (long cords coiled up can overheat, as well as 

    cause tripping accidents).

Summary of Contents for NY23ECF-13L








Reviews: