4
1. Plug into any AC220-240V ~50Hz AC source. (See important safeguards section
3.2 regarding use of extension cords).
2. Your heater is equipped with rotary knob switch.
3. Place heater in a nearby location where the heat and light can reach you.
4. Heater should be placed on a level and even floor as uneven floors can cause
the safety tip-over pin to shut off the heater (Best not to use over carpet that has
long pile).
REMEMBER: portable electric heaters are designed for spot heating, or as a
supplementary heat source. They are not intended to be main sources of heat
during the normal heating season.
Note: There may be a trace of smoke or odor when unit is first operated. Do not be
alarmed, this indicates that a drop of oil fell on the heating coil during the
manufacturing process. It will quickly evaporate, and should not re-occur.
OPERATING INSTRUCTION
Your heater is fitted with a safety device thermal fuse that Shuts off the heater by
thermal fuse in the event of overheating or malfunction and not operates by some
other accidental reason.
If overheating or malfunctions continue, return the heater to an Approved Service
Agent for examination.
The most common cause of overheating is deposits of dust or fluff entering the
heater, Ensure these deposits are removed regularly by unplugging the unit and
vacuum cleaning air vents and front grille.
SAFETY CONTROL
Safety distance in a narrow place when in use and the surrounding objects
1m Above
Front
Front
Black
0.5m Above
0.5m Above
0.5m Above
0.5m Above
Summary of Contents for NS8-15D1
Page 6: ...5...
