Installation
Steps before Washing
Connection of inlet pipe, tap and washing machine
Adjust the adjustable foot to make the washing
machine stable.
Connect with power source.
Turn on the water supply.
Put down the drain pipe.
Install the water Inlet pipe.
Before washing, please do take out coins, keys and other pointed objects from the pockets and zip up
clothes tightly to prevent them and wash tub from damage.
Put in
washing powder.
clothes and suitable amount of
Adjustable foot (extends when
clockwise rotating & shorten
when counterclockwise rotating)
(Slightly incline the washing
machine first & loosen the adjustable
foot knob. Adjust the adjustable foot
so as to ensure four corners of washing machine
be steadily in contact with the ground. Then
tighten the adjustable foot knob and lock it. If
the ground is not flat, correction
should be made on the ground surface, otherwise the
washer tub will incline and knock the cabinet)
Loosen clamp nut
thread
Loosen 4 bolts
thread
Set connecting base on tap
& tighten bolts evenly
Tighten Clamp
Press slide bushing insert inlet
pipe into, connecting base
Connection Finished
Ater connection & installation,
check if there is water leakage
Note:
Make sure that the installation is done by CMI trained installation
engineers only. Please call Midea Service Centre for any enquiry.
14
15
Installing the Rat Protection Cover
1 Lay down the washing machine
on a soft fabric or cushion.
2 Insert the anti rat protection
cover to be firmly fixed from the
back or front of washing machine
& fix it with screw.
Front
Soft Fabrics
Summary of Contents for MWMTL065ZOF
Page 16: ...Memo 28 29...
