Installation
1. Remove package
3. Placement of water drain pipe
2. Installation of drain pipe
Note :
Make sure that the installation is done by CMI trained installation
engineers only. Please call Midea Service Centre for any enquiry.
13
1. Remove package
• Remove package and take out
the bottom board of the cabinet
on the foam cover.
• Open the lid of washer’s door
and take out the accessories.
• A trial operation or washing on the
foamed cushion is strictly forbidden.
• Completely sleeve the drain pipe over the outlet.
• Fix and tighten it with a spring clamper that comes
with the washing machine. (As shown in the figure)
If the water drain pipe needs to be extended,
its length shall not exceed 3 meters,
otherwise it will affect the water discharging time.
The placed height of water drain pipe
shall not exceed 15cm.
Do not bend the water drain pipe and
place it under the base of washing machine.
12
Please insert the power
plug tightly.
Please don’t pull out or
insert the plug with wet
hands to avoid electric
shock.
Please use correct power
source.
Please ensure that the water
inlet pipe is connected and
the tap is opened before
washing clothes.
Users are not adviced to
change the plug on their own.
If required please contact
Midea Service Centre.
The water temperature
o
shall not exceed 50 C,
when washing with
warm water.
Please do not pull the electric
cord while taking out the
power plug.
Please do not wash raincoat,
fishing coat & water proof
clothes in the washing
machine.
Please do not place burning
candle, mosquito-repellent,
incense, cigarette &
lectric stove,
air heating fan & other heating
sources on the lid of
washing machine.
other
flammable things, e
Summary of Contents for MWMTL065ZOF
Page 16: ...Memo 28 29...
