GD Midea Refrigerant Equipment Co. Ltd Service manual for E1 Window
2
1.3 FEATURES
Designed for HEAT PUMP.
Powerful cooling & heating.
Slide-in and slide-out chassis for the simple
installation and service.
Side air-intake, side cooled-air discharge.
Washable one-touch filter and easy removed
panel.
Super compact design.
Reliable and efficient rotary compressor is
equipped.
Unique Quiet Design.
Fresh air switch.
1.4 DIAGRAM PANEL
AUTO LOUVER
When the switch is on, the louver motor will operate and begin auto louver function.
When the switch is off, the louver motor will stop.
THERMOSTAT
Set the temperature desired.
SELECTOR
Select the operation function in COOL, HEAT or FAN ONLY with HIGH, MID or LOW fan
speed.
TEST RUN
Turn the knob to this position to operate the unit in FORCED COOLING. Under this mode,
the unit will operate in cooling immediately.
WAIT THREE MINUTES BEFORE RESTARTING
To protect the compressor, please do NOT restart the unit in COOLING or HEATING mode
in three minutes.
1.5 OUTSIDE DIMENSIONS
Model
A
(mm)
B
(mm)
C
(mm)
MWF-07CM
MWF-09CM
346
450
535
MWF-12CM
380
600
560
MWF-16CM
MWF-18CM
430
660
687
MWF-21CM
MWF-24CM
430
660
770
