Midea MVC-SC861B, Instruction Manual

Page: 7 / 20

Crevice nozzle
CAUTION
Risk of injury! Never hold the crevice nozzle close to the body or it may stick to the skin. If
the nozzle does get stuck, set the On/Off switch to
immediately.
The crevice nozzle is designed for upholstery, cleaning the interior
of cars and for getting into all corners and cracks that are
inaccessible with the floor nozzle attachment or without a nozzle.
Preparing to use the appliance
CAUTION
�
Only switch the vacuum cleaner on once you have checked that all parts are fully assembled
and all filters correctly inserted.
�
Under no circumstances should the appliance be used on the following:
– Liquids or wet materials (e. g. carpet shampoo when wet)
– Glowing ash, cigarette ends, matches etc.
– Combustible or in flammable substances
– Very fine dust (e. g. concrete dust) or toner
– Hard, pointed objects such as large splinters of glass
1. Fit or remove the rod handle depending on whether you want to u se the vacuum cleaner as
a handheld or a floor appliance.
2. You can use the vacuum cleaner either without a nozzle or fit
one of the nozzles to the suction opening.
3.
To quickly unwind the cable from the floor vacuum cleaner, twist down the
cord holder on the top handle.
4. Insert the power plug in a wall outlet.
5. Set the On/Off switch to .
6. Move the suction opening or nozzle over the surface to be cleaned.
7. After finishing vacuuming, set the On/Off switch to
and unplug.
8. After use, always empty the dust collector and clean the dust filter.