Midea MVC-SC861B, Instruction Manual

Page: 8 / 20

Cleaning
CAUTION
�
Remove the power plug before cleaning and / or putting away.
� Do not use caustic or abrasive products to clean the housing or you may damage the surface.
� Never immerse the appliance in water.
Emptying dust collector and cleaning dust filter.
1. Hold down the unlocking button for the dust collector and carefully
remove.
2.
Hold the dust collector over a dustbin, carefully remove the dust filter and
empty the dust collector.
3. Bang the dust filter gently.
4. Then wash the dust filter under cold running water.
CAUTION: Do not wash the dust filter in the washing machine.
5. Leave the dust filter to dry in the air for 24 hours until completely dry before reinserting.
CAUTION: Never use a hair dryer.
6.
Press the dust filter firmly back into the dust collector so it fits closely all round the wall of the housing.
CAUTION: Never use the vacuum cleaner without the dust filter inserted.
7. First insert the dust filter in the bottom of the appliance and
then close. Press the unlocking button for the dust collector to
engage. The dust collector must have securely engaged at the
top and bottom of the appliance.
Cleaning or replacing motor protection filter
Once you have removed the dust collector, you will find a piece
of non-woven material on the open side of the appliance. This
is the motor protection filter. It needs to be cleaned from time
to time.
1. Remove the motor protection filter from the appliance and bang off the dust.
2. Rinse with lukewarm water.
3. Then give the motor protection filter a good shake and leave to dry off completely.
CAUTION: Never insert the motor protection filter while still damp.
4. Check the motor protection filter for damage and replace with a new one if necessary.
5. Reinsert the motor protection filter.
Cleaning housing
Clean the housing with a slightly damp, soft cloth if necessary.