![background image](http://html1.mh-extra.com/html/midea/mm617abn/mm617abn_instruction-manual_1791389006.webp)
F
A
C
B
E
D
G
Hub(underside)
Glass tray
Turntable ring assembly
Turntable shaft
3.0 inch(7.5cm)
3.0 inch(7.5cm)
12 inch(30cm)
OPEN
5
SETTING UP YOUR OVEN
Installation
Countertop
Installation
TURNTABLE INSTALLATION
Names of Oven Parts and Accessories
a. Never place the glass tray upside down.The
glass tray should never be restricted.
b. Both glass tray and turntable ring assembly must always
be used during cooking.
c. All food and containers of food are always placed
on the glass tray for cooking.
d. If glass tray or turntable ring assembly cracks or breaks,
contact your nearest authorized service center.
Remove all packing material and accessories.
Examine the oven for any damage such as
dents or broken door. Do not install if oven is
damaged.
Cabinet:
Remove any protective film found
on the cabinet surface.
Do not remove the light brown Mica cover
that is screwed to the oven cavity to
protect the magnetron.
1. Select a level surface that provide
enough open space for the intake
and/or outlet vents.
A minimum clearance of 3.0 inch
(7.5cm) is required between the oven and
any adjacent wall.One side must be open.
(1) Leave a minimum clearance of 12
inch(30cm) above the oven.
(2) Do not remove the legs from the bottom
of the oven.
(3) Blocking the intake and/or outlet openings
can damage the oven.
(4) Place the oven as far away from radios
and TV as possible.Operation of microwave
oven may cause interference to your radio
or TV reception.
2. Plug your oven into a standard household
outlet. Be sure the voltage and the frequency
is the same as the voltage and the frequency
on the rating label.
WARNING:
Do not install oven over a range
cooktop or other heat-producing appliance. If
installed could be damaged and the warranty
would be void.
Remove the oven and all materials from the carton.
Your oven comes with the following accessories:
Glass tray 1
Turntable ring assembly 1
Instruction Manual 1
A) Control panel
B) Turntable shaft
C) Turntable ring assembly
D) Glass tray
E) Observation window
F) Door assembly
G) Safety interlock system