Midea MHS60S, Instruction

Page: 6 / 12

6
z
In the installation surface in cabinet don’t adapt to install the cooker hood, then as per fig, fix
the position of cooker hood on the wall.
z
On the wall, install 2 screws ( supplied ) according to the relative position of 2 key holes on
the back of hood.
z
The extent of screwing should be convenience to the next installation.
z
Also install screws in the security holes, in case of front and back moving of hood, so that the
using is safer.
Installation of hoods built in combi cabinets is the same as previous method.
Information
The cooker hood must not be installed and connected to flues where other appliances are
installed and which run off other energy supplied different to electricity(water heater boiled
cookers(range/agas)etc.).
Right Wrong
Information
Congratulations on the purchase our cooker hood which is designed to include many superior
features that permit you the fullest expression of your living. Before installing and/or using the
cooker hood carefully read all the instruction.
CONNECTIONS
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney
using either a flexible or rigid pipe ɸ 150 or ɸ 120 mm, the choice of
which is left to the installer.

To install a ɸ 120 mm air exhaust connection, insert the reducer
flange
3
on the hood body outlet.

Fix the pipe
4
in position using sufficient pipe clamps (not
supplied).

Remove possible charcoal filters.