Midea MHC60GSS, Instructions Manual

Page: 5 / 12

INSTALLATION
As a first step, proceed with the following drawings:
l line up to the ceiling or up to the upper limit, at the center of the area in which the hood is
to be fitted.
A horizontal line A at 980 – 1080 mm above the cooker top.
A horizontal line
B
at a
X
mm above the horizontal line
A
.
A horizontal line
C
at a 261 mm below the horizontal line
A (solution2)
.
Mark Points:
Mark a point
(1)
on the horizontal line
A
,
80
mm to the right of the vertical reference line.
Repeat this operation on the other side and on the vertical reference line, checking that the
three marks are leveled.
Mark a point (2) on the horizontal line B , 40 mm to the right of the vertical reference line.
Repeat this operation on the other side , checking that the two marks are leveled.
Mark a point (3) on the horizontal line C , 180 mm to the right of the vertical reference
line (solution2) .
Repeat this operation on the other side , checking that the two marks are leveled.
Fix the brackets :
Drill at the marked points (1)
、
(2)
、
(3)(solution 2) , using a ɸ10 mm drill bit.
Insert the Wall Plugs 11 into the holes (1)
、
(2)
、
(3)(solution2) .
Fix the hood fixing bracket
20
with 3 screws
10
(5 x 50) at the horizontal line A.
Fix a Chimney fixing bracket 21 with 2 screws 10 (5 x 50) at the horizontal line B.














WALL DRILLING AND BRACKET FIXING
Option Chimney X
1
400+0
/
2
400+300 390-620
3 400+390 390-710
80 80
40
40
980-1080
A
B
(1)
(2)
X
261
C(solution2)
180 180
(3)
2 3 4
6 7 8
9 10 11
5