Midea MGD2020D, Owner'S Manual, Page: 25 / 26

Troubleshooting
10
Note
Please confirm the following contents before the entrusted maintenance
Fault Symptom
The device does not
work after starting up.
No steam sprays after
the device is turned on.
Water drops from
ironing head
Water leakage
Steaming is not smooth
Steam
goes out from
ot
her
par
ts
besides ironing head.
After
t
urning
on t
he device
,
t
he op
t
ion lamp flashes.
Handle control failed
Possible causes
Power plug is not plugged in socket.
Residen
t
ial circuit failure or fuse blows.
Circuit failure of product.
Internal steam channel is bent or
disconnected.
Heating plate is damaged.
Indicator light is on, but no steam.
No or little water in water tank.
Steam lead pipe is bent.
The seals in the device are damaged.
Voltage is too high or too low;
The handle circuit failed.
Wat
er
o
verflows in
t
he
connect
ion be
t
wee
n
t
he wa
t
er
t
ank and main machine.
Heating plate is damaged.
Too
much
scale
depo
s
i
t
in hea
t
ing pla
te
.
The product shall be placed on a high
platform, such as on the table or chair.
Steam condensation is normal.
Insert the power plug.
Ask professionals for examination and maintenance.
Ask professionals for examination and maintenance.
Ask professionals for examination and maintenance.
Ask professionals for examination and maintenance.
Ask professionals for examination and maintenance.
Add water into the water tank.
Turn on the device, put on gloves, pinch the bent part with
your hand, shape and restore it.
Ask professionals for examination and maintenance.
After the power supply voltage is normal, the heating can be
automatically resumed.
Ask professionals for examination and maintenance.
Make the bend straight when the steam flow reverses in the
pipe. Clean off the scale deposit in the heating plate.
Ask professionals for examination and maintenance.
Turn off the device, clean off scale deposit in the heating plate.
Place the product on the ground.
When using the device, lift the ironing head, vertically pull the
steam lead pipe straight, and shake the ironing head.
Handling method