Midea MGD2020D, Owner'S Manual, Page: 21 / 26

Ironing method
6
Operating instructions of machine body
The operation on the machine body can realize "On/standby".
Function Functional description
Press the key to on/standby
After being plugged in, the machine will standby and the " "
light will flash. After touching the " " key, the main mac
hine
will start to work; touch the " " key again, and the main
machine will standby.
①
After the main machine is plugged in, long press the handle " " key for more
than 1 second to On and Standby
（
Steam pause
）
.
②
After turning on the device, press the handle " " key briefly to select the appropriate gear for ironing.
Note: The steam will not come out until it is preheated for about 120 seconds.
Handle control
The handle control can realize "Gear selection" and "On/standby"
Ironing method
Two ironing modes
Gentle Reminder: When the vertical/horizontal ironing mode is switched, the ironing head can be placed in its holder, and please pay attention to
stabilize the ironing board to prevent the slipping and hurting.
1 Vertical ironing
The hanger is hung in the middle of
the ironing head rack, or the clothes
are put into the hanging rod to start
ironing.
2 Horizontal ironing
Clothes can be placed flat on the ironing board for ironing.
(1) Hold the ironing
board firmly and
rotate the fixed lever
counterclockwise
Fixed lever
Pull out the slide bar
bracket to make the main
machine more stable
during ironing
Effect diagram of horizontal ironing mode
(2) Loosen the lever of landing
support rod, lift the landing
support rod, and slowly
lower the ironing board.
(3) When the ironing
board is stable, lock
the lever of landing
support rod.
The lever of
landing
support rod
The lever of
landing support rod