Midea MGD2020D, Owner'S Manual, Page: 23 / 26

Safety warning
8
Reminder
Basic safety precautions should always be followed to ensure secure use and avoid injury and/or property loss to user and others. Any
misuse that violates the security warnings may lead to accident.
Note
Represents [FORBIDDEN] content
Anti-scald Warning: high temperature mark suggests be careful of scalding.
•
The appliance cannot be connected to a DC power supply for operation.
•
Do not use other large power appliance on the same socket to avoid overcurrent.
•
Do not disassemble the device by yourself. Anyone other than professionals is not allowed to disassemble or repair the
device, or it may cause fire, electric shock, or personal injury.
• Please take the device to the after-sale service office specified by the company for repair.
•
Do not allow children to operate alone. All parts of the product should be placed out of reach of infants or incapacitated
persons to avoid the risk of electric shock, scratch, etc.
•
Please do not hang the weight larger than 5 kg on the hanger.
•
The electric iron must be used and placed on a stable surface.
•
When placing the electric iron on its holder, ensure that the holder is placed on a stable surface.
•
The electric iron cannot be used if it has been dropped, has visible signs of damage or leakage.
•
Before ironing, please check fabric label, and ensure it is suitable for ironing to avoid damaging the garment by high
temperature. (such as silk and other special fabrics)
Cautions before use:
•
Before powering on, please examine plug and power cord carefully. In case of supply cord damageas, the cord should be
replaced by professionals of the Manufacturer, the Maintenance Department or similar departments. Ensure the power plug dry
before using.
•
Before starting to use the electric iron, all the support rods should be pulled open to place the ironing head safely.
•
The product shall not be placed on a high platform, such as on the table or chair.
• Before the electric iron works, ensure that the whole machine and the base of the support rods are flat and stable to
prevent the electric iron from overturning or water from overflowing.
•
If you need to move the device, lift it to move, and do not drag power cord and steam lead pipe.
Conditions unconsidered: The appliance is used by unsupervised children or the disabled, or played with by children.
Cautions during use:
•
Do not use the product for other purposes beyond ironing garments.
•
Users are not allowed to leave while the electric iron is powered on.
• Do not heat the water in the water tank when it is insufficient.
• When filling liquid and cleaning, the power plug should be unplugged.
• Before filling the water tank, the plug of the power cord of the appliance must be unplugged from the socket.
•
Care should be taken to prevent the danger of steam splashing during the use of the electric iron. Do not point the ironing head
at people to avoid scalding.
•
When the electric iron is powered on, the ironing head, steam lead pipe and its connector will be very hot. Please do not touch
them to avoid scalding. When the ironing head begins to spray water, please lift the ironing head, vertically pull the steam lead
pipe straight, and slightly shake the ironing head.
•
When the electric iron is powered on, the device will generate high-temperature steam, which will make clothes with poor heat
resistance deform, discolor or decolor, for example, the fur clothing. Please do not use the device to iron these clothes.
•
When the electric iron is powered on, please keep the power cord away from the heating surface of the device, such as steam
lead pipe and ironing head.
•
Do not bend or wind the steam lead pipe or make it U-shaped when the electric iron is powered on.
•
During the operation, do not drag the garment hard, or the supporting rod may turn down.
Cautions after use:
• After using, please turn off the device at first, and then unplug the power cord.
•
When pulling out plug, you must hold the plug with one hand. Do not drag power cord or operate with wet hand.
•
Before storage, ensure that the electric iron has been cooled, and discharge the water in the device.
Safety protection:
•
Temperature detection protection: There is a temperature sensor in the electric iron. When the temperature rises abnormally,
the temperature sensor will output a signal to cut off the connection of the heating element, making the device temperature
within the appropriate temperature range.
•
Thermal fuse protection: There is a thermal fuse in the electric iron. When the temperature is abnormal and the temperature
sensor is ineffective, the thermal fuse will be disconnected to directly cut off power and prevent any accident.
• Set the shutdown function: When the electric iron is powered on, the whole machine is equipped with an automatic shutdown
function after continuous working for 1 hour to avoid accidents in case that the user leaves for a long time