Midea MFWS712, User Manual

Page: 7 / 24

Unpack the clothes washer
INSTALLATION
Remove the clothes washer from the carton. Please dispose of packaging and plastic
bags responsibly.
Open the washer door and remove the accessories from inside the washer (as listed
on page 4).
Select the location
Remove transit bolts
Before installing & using this washing
machine, the transit bolts must be removed
from the backside.
The clothes washer should be located on a firm and flat surface. An uneven surface may
cause excess operating noise or vibration and effect the performance of the washer.
-
The noise may be increased if the floor is not firm.
-
It is not recommended to place on carpeted flooring. If this can not be avoided, place a
solid sheet under the appliance.
-
Choose a location which is indoors, dry & away from high temperature and high
humidity.
-
Ensure room temperature is not below 0°C.
-
Make sure that air circulation around the machine is not impeded by carpets, rugs etc.
-
Check that the machine does not touch the wall or cupboard.
CAUTION
All transit bolts & packaging must be removed before using the appliance.
1.
Loosen all 4 bolts with a spanner to
remove them.
Plug the holes with transit hole caps
provided.
Keep the transit bolts for future use to
protect the drum during transportation.
1.
5
2.
2.
3.