Midea MFA3T-96CRN1, Technical & Service Manual

Page: 52 / 111

Midea R410A T3 50Hz Top-discharge Series MCAC-UTSM-201707
51

Install the unit where the supply air flow can be sent to all parts in the room.

Install the unit where it is easy to lead out the connective pipe and the drain pipe.

Install the unit where no heat is emitted from a heat source directly.

Installing the equipment in any of the following places may lead to faults of the equipment (if that
is inevitable, consult the supplier):

The site contains mineral oils such as cutting lubricant.

Seaside where the air contains much salt.

Hot ring area where corrosive gases exist, e.g., sulfide gas.

Factories where the supply voltage fluctuates seriously.

Inside a car or cabin.

Place like kitchen where oil permeates.

Place where strong electromagnetic waves exist.

Place where flammable gases or materials exist.

Place where acid or alkali gases evaporate, or other special environments.

Install the unit where the air inlet and air outlet are free from obstacles and strong wind.

Install the unit in a dry and well ventilated place.

Install the unit where the bearing surface is level and can bear weight of the unit, and is suitable
for installing the unit horizontally without increasing noise or vibration.

Install the unit where the operation noise and the expelling of air do not affect neighbors.

Install the unit where no flammable gas is leaked.

Install the unit where it is convenient for pipe connection and electric connection.