MCAC-VTSM-2014-09
R410A All DC Inverter Mini VRF
55 Installation
2. Accessories
Please check whether the following fittings are of full scope. If there are some spare fittings, please restore
them carefully.
INSTALLATION FITTINGS
NAME
SHAPE
QUANTITY
1. Outdoor unit installation
manual
1
2. Outdoor unit owner’s
manual
1
3. Indoor unit owner’s manual
1
4.Outflow connecting tube
1
3. Outdoor unit installation
3.1 Installation space selection
Install the outdoor unit at a place where discharge air is not blocked. When an outdoor unit is installed in a
place that is always exposed
To a strong wind like a coast or on the high store of a building, secure a normal fan operation by using a
duct or a wind shield.
When installing the outdoor unit in a place that is constantly exposed to a strong wind such as the upper
stairs or rooftop of a building, apply the windproof measures referring to the following examples.
Install the unit so that its discharge port faces to the wall of the building. Keep a distance 2000mm (78.7
inch) or more between the unit and the wall surface.
Supposing the wind direction during the operation season of the discharge port is set at right angle to the
wind direction.
Do not install the unit in a place full of machine oil.
Do not install the unit in a place full of sulphuric gas.
Do not install the unit in a place where high-frequency radio waves are likely to be.
3.2 Installation space (units: mm)
Since the gravity center of the unit is not at its physical center, so please be careful when lifting it with a
sling.
Never hold the inlet of the outdoor unit to prevent it from deforming.
Do not touch the fan with hands or other objects.
Do not lean it more than 45°, and do not lay it sidelong.
Strong
wind
Strong
wind
78.7 inch(2000mm)
