Top
board
Control panel
Door
Front panel
Side panel
Filter
Flexible
duct
Power plug
Switch
Tumble Door
7
8
•
not less than 10cm distance from the wall. It is suggested
there are no obstacles within 1.5m in front of dryer and
keep ventilated.
Dryer should be placed in a ventilated area with
>10cm
INSTALLATION
INSTALLATION
Product Description
Installation
the dryer will work unbalanced or stop working sometimes.
if dryer could not be placed horizontally (the lean angle is no more than 2
°
,
Notice when installing:
•
Do not install the dryer in the open air or place easily
damaged by rain;
•
Do not place the back of dryer near curtain or something
in the wind;
•
Do not place the dryer near gas or flammable area.
•
• Connect one end of flex tube with whorl to the back vent, then fix it deasilly till tight.
• The other end of flex tube will be extended to outdoor, please refer the right
assemble way to the below pictures.
Flex tube fixing:
Note!
•
Level Adjusting
Once in its permanent operating position,
check that the dryer is absolutely level with the aid
of a spirit level. If it is not, adjust the feet with a tool.
