Timer
In working or standby state, after the "Timer" button is pressed, the buzzer gives
out a sound, the nixie tube flashes and displays the "0", indicating that the induction
hotplate enters timing working state. Each time the "+" or "-" is pressed, the time
can increase or decrease by 1 minute. If it is held, the time will increase or decrease
minutes quickly with 10 minutes as an increment.
In the timing setting state, press the timer button again will cancel the timing. After
timing period is set, the time stabilizes after the nixie tube flashes for 5 seconds
to confirm the period to be effective. If the timer is 0, the timer is noneffective.
In the timing working state, hold the timer button to cancel the timing.
When the working time reaches, the hotplate will shut down automatically.
Automatic Shutdown Protection:
The induction hotplate will shut down when the hotplate default timer of program
is reached unless the user sets the timer himself.
The default timer of each level are as follow:
E2
E3
E4
E1
E6
E7
E8
E5
Eb
EC
Open circuit (abnormality
of the main transducer)
Short circuit (abnormality
of the main transducer)
High temperature (abnormality
of the main transducer)
Low voltage protection
High voltage protection
Open circuit (abnormality of the
transducer of the heat sink)
Short circuit (abnormality of the
transducer of the heat sink)
Invalidation of the main
transducer
High temperature (abnormality
of thetransducer of the
heat sink)
fan failure
Level
Default timer
(hour)
1
4
2
3
5
6
4
4
3
3
2
2
5
Shut down
Press the "ON/OFF" button in the standby state or working
state, the buzzer will sound and the cooker will in off mode.
Failure and Protection Code:
If anything unusual happened, the induction cooker will enter into
protection mode automatically and display corresponding protection code.
Code
Code
Failure
Failure
