TRANSPORTING
Remove all packaging material and adhesive tape before using your new refrigerator.
This includes the foam base and all adhesive tape holding the refrigerator accessories
inside and outside.
Clean both the inside and outside of the refrigerator with a soft cloth and lukewarm soapy
water.
Keep the refrigerator upright and avoid squeezing or vibration
during transport. Avoid a slanting angle over 45 degrees during
handling. Avoid the door or top cap from being under excessive
stress when moving, otherwise it may become deformed.
5
Positioning your refrigerator
Place your refrigerator in a well ventilated area away from a heat source and direct
sunlight. Do not install the refrigerator in a damp or wet location as this may cause
damage to the insulation and result in leakage. Condensation may also build up on the
outer cabinet causing rust.
Use the front two adjustable feet to level the refrigerator. Rotate the feet in a clockwise
direction to raise the refrigerator and anti-clockwise to lower. Ensure the refrigerator
slightly tilts backwards so that the drawer and door self-close to provide a consistent
closed seal.
CAUTION
INSTALLATION
Do not connect your refrigerator to the power supply immediately after it is
placed vertically. You should keep it standing for at least 3 hours before
connection to let it settle.
There should be a clearance of at least 200mm from the
top of your refrigerator, a minimum of 30mm from both
sides of the refrigerator, and 50mm at the back of the unit
to allow for adequate ventilation.
50mm
30mm
30mm
Allow for adequate ventilation around your refrigerator
Recommended
airspace
Door
