![background image](http://html1.mh-extra.com/html/midea/mb112w/mb112w_user-manual_1791530008.webp)
REVERSING THE DOOR
6
WARNING
Please ensure the refrigerator is unplugged from the main power source and
any items are removed from inside the refrigerator and door bins before
reversing the door.
Follow below steps to reverse the door from the supplied position.
Remove the plastic cover from the top door hinge.
Carefully tilt the refrigerator back to access the bottom
hinge assembly. Note: Do not tilt >45°. Remove the screws
and foot from the bottom bracket. Remove the foot from
the opposite side.
Place to one side.
Slide the door down off the top hinge pin and lift away from
the unit.
Remove the screws from the top bracket. Remove the
plastic caps from the other side and replace the bracket
and screws on this side. Fit the plastic caps into the
opposite side.
Slide the door back on to the top hinge, making sure it is the
right way up. Screw the bottom hinge into place on the new
side. Do not tighten. Replace the foot on the other side.
Check the door is aligned horizontally and vertically and the
seal is closed on all sides before finally tightening the bottom
hinge. Re-level the feet.
Replace the plastic cover by clicking back into position on the
top door hinge.
1.
2.
4.
3.
5.
6.
8.
step 1
step 5
step 7
7.
step 6b
step 2
step 6a