Midea KJR-12B/DP(T), Owner'S Manual

Page: 11 / 20

7

Mode botton:
When press this botton,the operation mode change as the following sequence:
Remark: For the cooling only model, the heating mode is skipped.

Timer on button:
Press this button, timer on function is active. Then every press, the time increase 0.5h,
after 10h, 1h increasement after each press. If cancel this Function,just set it to “0.0” .

Timer off button:
Press this button, timer off function is active.Then every press, the time increase 0.5h,
after 10h, 1h increasement after each press. If cancel this function, just set it to “0.0” .

Follow me button / I-FEEL button:
When under cool, heat and auto mode, press this button, follow me function is active.
Press again, this function is ineffective.

Auxil heater button/Heater button:
If press this button in heat mode, electri- cal heater function become ineffective(it may be
ineffective for some models).

Reset button(hidden):
Use a 1mm stick to press in the little hole , then the current setting is canceled . The wire
controller enter into original state.

ON/OFF button:
When in off state, press this button, the indicator is on, the wire controller enter into on
state, and send setting information to in door Pcb. When in on state,press this button, the
indicator is off, and send instruction. If timer on or timer off has been set, it cancel this
setting then send instruction to stop the machine.

Adjust button ▲:
Set indoor temperature up. If press and hold on, it will increase at 1°C(2°F) per
0.5 second.

Adjust button ▼:
Set indoor temperature down . if press and hold on,it will decrease at 1°C(2°F) per 0.5
second.